I-75 and the Manatee River
Drywall Contractors in Ellenton, FL
Ellenton sits on the north side of the Manatee River where I-75 crosses, east of Palmetto. Its housing includes established neighborhoods, newer subdivisions and many manufactured-home communities, and each needs a slightly different repair approach.
- Veteran-owned
- Background-checked techs
- 1-year written warranty
- Text-a-photo quotes
Free estimate in about an hour
- Text a photo to 727-242-8500
- Written quote = final price
- HEPA dust control on every job
- Walkthrough before you pay
Know your walls before you call
In Ellenton, the first question we ask is what kind of house you have. A site-built home, whether an older block ranch or a new subdivision house, has standard drywall that we patch, tape and texture in the usual way.
Many manufactured homes are different. Their walls are often thinner gypsum panels with a vinyl or paper finish applied at the factory, joined by strips called battens rather than taped seams. Ceilings may be textured panels or a sprayed finish on thin board. Repairs are possible, but they follow different rules: we cannot always match a factory print exactly, and sometimes the best result is to replace the damaged panel.
Manufactured home repairs we handle
Ceiling leak stains
Roof seams and vents on manufactured homes are common leak points. Once the roof is sealed, we replace soft ceiling sections and restore the texture.
Damaged wall panels
Holes and water damage in thin panels can be patched or the panel replaced. We discuss whether a seamless repair is realistic with your finish.
Whole-room conversions
Some owners would like battened panels replaced with taped drywall for a site-built look. That is installation work rather than repair, so we refer it to a drywall installer or general contractor.
Soft spots near bathrooms
Leaks at tubs and toilets wick up thin wall panels. We cut out damaged areas once the plumbing is repaired.
Site-built homes in Ellenton
Ellenton's site-built houses range from older single-story homes to newer construction closer to the interstate. Typical requests include nail pops and seam cracks in newer houses, worn and dated textures in older ones, and patching after plumbers or electricians open walls.
Our standard drywall repair covers holes, dents and damaged board. Where an older home needs a ceiling update, popcorn ceiling removal is a frequent next step, with an asbestos test first for ceilings older than the mid-1980s. If an AC replacement left openings in a hallway ceiling, our post-HVAC repair service closes them.
Repair or replace a manufactured-home panel?
With factory-finished panels, the honest answer depends on the finish and the size of the damage. A small hole in a plain, paintable panel can be backed, filled and textured like any drywall patch. A hole in a printed or vinyl-covered panel is harder: the patch can be smooth and solid, but the pattern will not continue across it, so it usually needs paint over the whole wall to look consistent.
Water damage changes the math again. Thin panels soak through quickly, and the wet area is often larger than the stain suggests. In that case, replacing the whole panel from batten to batten is cleaner and often not much more expensive than patching. Converting a whole room to taped drywall for a site-built look is a bigger project for a general contractor. We lay out each option with a written price so you can choose what fits the home and your budget.
What to send us for an accurate quote
Photos are all we need for a free virtual estimate. These details help:
Whether the home is site-built or manufactured.
A close-up showing the wall or ceiling surface finish.
Any battens, trim strips or seams near the damage.
Whether the leak or other cause has been repaired.
Community rules on work hours, if your park or HOA has them.
Neighboring communities
We serve Ellenton along with Palmetto to the west and Parrish to the north. South of the river, Heritage Harbour is a short drive away. More options are on our Manatee County service page.
Wall & ceiling services in Ellenton
Wall & Ceiling Repair
Ellenton repairs often start by identifying whether the home is site-built or manufactured, since the wall and ceiling materials differ.
Learn more about Wall & Ceiling Repair →
Drywall Repair
In site-built Ellenton homes we patch and replace standard drywall; in manufactured homes we may replace a full factory panel for a cleaner result.
Learn more about Drywall Repair →
Seam & Crack Repair
Newer Ellenton subdivisions show seam cracks and nail pops as framing settles, which we re-tape and refinish once the house has stabilized.
Learn more about Seam & Crack Repair →
Damaged Drywall Replacement
In Ellenton manufactured homes a water-damaged factory panel is replaced batten to batten, while in site-built homes we cut out the soft section of drywall and fit a new piece.
Learn more about Damaged Drywall Replacement →
Texture Matching
Ceilings in Ellenton manufactured homes often carry a sprayed texture on thin board, which we repair carefully to avoid cracking the panel.
Learn more about Texture Matching →Painting Prep
Before painting in Ellenton, we check whether walls are paintable drywall or factory-finished panels, since vinyl surfaces need special priming.
Learn more about Painting Prep →Patch Finishing
Ellenton patches on standard drywall are feathered and textured to vanish; on vinyl-faced panels we tell you upfront that a perfect print match is not always possible.
Learn more about Patch Finishing →Plaster Repair
Plaster is uncommon in Ellenton housing, but where an older home has a hard-coat finish we repair it with compatible materials.
Learn more about Plaster Repair →
Popcorn Ceiling Removal
Older Ellenton homes with popcorn ceilings need an asbestos test if they predate the mid-1980s, before any removal begins.
Learn more about Popcorn Ceiling Removal →Drywall Repair After HVAC Work
AC replacements in Ellenton homes often leave ceiling or closet openings, which we close with board matched to the existing thickness.
Learn more about Drywall Repair After HVAC Work →
Drywall Repair After Plumbing Work
Tub and toilet leaks in Ellenton manufactured homes soak thin wall panels quickly, and we rebuild those areas once plumbing is fixed.
Learn more about Drywall Repair After Plumbing Work →
Drywall Repair After Electrical Work
Electrical updates in Ellenton homes leave cut-outs that we patch to match, whether the wall is drywall or a factory panel.
Learn more about Drywall Repair After Electrical Work →Contractor Damage Repair
When other trades damage walls during Ellenton remodels or installs, we repair the surface so the job can wrap up.
Learn more about Contractor Damage Repair →
Also serving near Ellenton
Frequently Asked Questions
Can you repair walls in a manufactured home in Ellenton?
Yes, though the method depends on the panel. Small holes can often be patched, but vinyl-faced or printed panels rarely match perfectly once patched. Replacing the damaged panel may give a better result. We explain the options from your photos.
My mobile home ceiling has a brown stain. What should I do first?
Get the roof checked and sealed first, since manufactured-home roof seams and vents are common leak points. Then send us photos. If the ceiling panel is still firm, it may only need stain-blocking primer; if it is soft or sagging, we replace the section.
Do you work in 55+ and manufactured-home communities?
Yes. Let us know about any community rules on work hours, parking or contractor check-in, and we will plan around them. Our technicians are background-checked and keep the work area clean.
What causes nail pops in newer Ellenton homes?
As framing lumber dries and shrinks in a new house, fasteners can push out through the drywall surface. We reset them, add a screw nearby, and refinish the spot so it disappears under paint.
Keep exploring
Tell us about the damage
Send the details and a photo through the form and we reply with a written quote, usually within the hour. The quote is the final price.
- Free virtual estimate, no obligation
- Veteran-owned, background-checked technicians
- HEPA dust control on every job
- 1-year written workmanship warranty
Get Your Free Estimate Today
Fill in your details and we'll respond within the hour — often in minutes.
Prefer not to use the form? Text a photo to 727-242-8500 or call 1-877-728-2448.
Ready for a flawless repair?
Text a photo, call for a free estimate, or send the form. We serve Tampa, Clearwater, Lakeland, Bradenton, Sarasota and all of West Central Florida.
Or text a damage photo to 727-242-8500 for a written quote, usually within the hour.