Polk County · Polk County
Plaster Repair in Polk County, FL
Historic homes around downtown Lakeland, Bartow and the Ridge towns can have plaster on wood lath, which we repair with compatible base and finish coats. Plaster repair for homes with original lath-and-plaster or plaster-on-block walls and ceilings.
- Veteran-owned
- Background-checked techs
- 1-year written warranty
- Text-a-photo quotes
Free estimate in about an hour
- Text a photo to 727-242-8500
- Written quote = final price
- HEPA dust control on every job
- Walkthrough before you pay
When Polk County homes need plaster repair
Polk County is the inland stretch of our service area, sitting along I-4 between Tampa and Orlando and dotted with lakes, from Lakeland's lakes to Winter Haven's Chain of Lakes. It mixes historic downtowns and old citrus towns on the Lake Wales Ridge with newer subdivisions and vacation rental communities in the northeast of the county.
- A section of wall sounds hollow or moves when pressed
- Ceiling plaster dips, bulges or has a crack with a slight sag beside it
- Spidery map cracking or crazing across the finish coat
- Earlier patches outlined by rings or raised edges
- Rust-coloured stains bleeding through paint over metal lath
- Crumbling, powdery plaster where a leak once wet the wall
- Cracks fanning out from the corners of doors and windows
What we fix
Plaster repair for homes with original lath-and-plaster or plaster-on-block walls and ceilings.
- Sagging plaster ceilings with broken keys
- Hollow or bulging wall plaster
- Map cracking and crazed finish coats
- Cracks at door and window corners
- Plaster-on-block cracks along mortar lines
- Holes left by removed fixtures, heaters or vents
- Failed spackle and drywall-mud patches on plaster
- Leak-softened plaster and corroded metal lath
- Sand-finish and smooth troweled texture matching
How a plaster repair job runs
Tap test and diagnosis
We sound out the surface to map loose plaster and identify whether it sits on wood lath, metal lath, rock lath or block.
Stabilise
Detached but intact plaster is pulled back tight with plaster washers or adhesive injection so nothing shifts during the repair.
Prepare and bond
Failed material is cut back to an undercut, sound edge and coated with a bonding agent so new plaster grips the old.
Rebuild in coats
Setting-type plaster or hardening compound is applied in layers, each scratched for the next, until the surface is flush.
Finish and prime
The final coat matches the original texture, is feathered wide, and receives a plaster-appropriate primer ready for paint.
Other repairs we handle in Polk County
- Wall & Ceiling Repair
- Drywall Repair
- Seam & Crack Repair
- Damaged Drywall Replacement
- Texture Matching
- Painting Prep
- Patch Finishing
- Popcorn Ceiling Removal
- Drywall Repair After HVAC Work
- Drywall Repair After Plumbing Work
- Drywall Repair After Electrical Work
- Contractor Damage Repair
Plaster Repair nearby
- Plaster Repair in Auburndale
- Plaster Repair in Bartow
- Plaster Repair in Davenport
- Plaster Repair in Dundee
- Plaster Repair in Frostproof
- Plaster Repair in Haines City
- Plaster Repair in Highland Park
- Plaster Repair in Hillcrest Heights
- Plaster Repair in Lake Hamilton
- Plaster Repair in Lake Wales
- Plaster Repair in Lakeland
- Plaster Repair in Mulberry
Plaster Repair questions
Is plaster better than drywall?
Each has strengths. Plaster is harder, denser and quieter, while drywall is faster to install and easier to patch. In a plaster house we keep repairs plaster-compatible so the wall behaves as one surface instead of mixing materials that move differently.
What is veneer plaster?
Veneer plaster is a thin, hard coat of plaster troweled over special blue gypsum board. It gives a durable plaster finish without three thick coats and is a good option when a whole wall or ceiling needs renewing in an older home.
Should I worry about lead paint on old plaster?
Homes painted before lead paint was banned for residential use may have it in older layers. We recommend testing before any sanding or demolition so the right precautions are used. Repairs that re-anchor rather than demolish disturb far less paint.
Can you add an outlet or light to a plaster wall without cracking it?
Your electrician cuts the opening; we recommend scoring and drilling rather than hammering. If the surrounding plaster cracks or loses its keys during the work, we stabilise and patch it afterwards so the fixture sits in a clean, solid opening.
Tell us about the damage
Send the details and a photo through the form and we reply with a written quote, usually within the hour. The quote is the final price.
- Free virtual estimate, no obligation
- Veteran-owned, background-checked technicians
- HEPA dust control on every job
- 1-year written workmanship warranty
Get Your Free Estimate Today
Fill in your details and we'll respond within the hour — often in minutes.
Prefer not to use the form? Text a photo to 727-242-8500 or call 1-877-728-2448.
Need plaster repair in Polk County?
Text a photo, call for a free estimate, or send the form. We serve Tampa, Clearwater, Lakeland, Bradenton, Sarasota and all of West Central Florida.
Or text a damage photo to 727-242-8500 for a written quote, usually within the hour.